What is an astrolabe?
An astrolabe is a model of the sky you can hold in one hand: a brass disc carrying a map of the heavens drawn for one latitude, with a pierced star map that turns above it. Sight the Sun or a bright star, turn the map to match, and the instrument gives the time of day or night and the degree of the zodiac rising in the east.
That rising degree is the Ascendant, the point from which every house of a chart is counted, and for centuries the astrolabe was one of the astrologer's main ways to find it. Astronomers used the same instrument to tell the hours, to find the height of a tower, and to set the times of prayer. It was refined and described at length in the Arabic-speaking lands from the ninth century on, and the names of its parts still carry Arabic words.
The parts of an astrolabe
A standard astrolabe, the flat or planispheric kind, is a small stack of parts held together by a pin through the center. The Arabic names below are the ones the treatises use; several of them passed into Latin and English.
| Part | Arabic name | What it does |
|---|---|---|
| The mother (mater) | al-umm | The body of the instrument: a thick disc with a raised rim. The rim, the limb, is divided into degrees or hours, and the plates sit inside it. |
| The plates (tympans) | al-ṣafāʾiḥ, singular ṣafīḥa | One plate for each latitude, since the sky looks different from Baghdad than from Toledo. Each is engraved with the horizon, the meridian, the circles of equal height and, often, the lines of the unequal hours. |
| The circles of equal height | al-muqanṭarāt | Circles marking every height above the horizon, from the horizon itself up to the point overhead. English keeps the Arabic word as almucantar. |
| The star map (rete) | al-ʿankabūt, the spider | A pierced plate that turns above the plate beneath. It carries the ring of the zodiac and pointers for bright fixed stars such as Aldebaran, Regulus and Vega. |
| The sighting rule (alidade) | al-ʿiḍāda | A bar with two sights on the back of the instrument. Hold the astrolabe hanging from its ring, sight the Sun or a star along it, and read its height on the scale behind. |
| The rule | — | A straight pointer on the front, turned over the star map to carry a position out to the limb, where the time is read. |
How an astrolabe tells the time
Telling the time began with a measurement. By day the astrologer let the instrument hang from its ring, turned the sighting rule until sunlight passed through both sights, and read the Sun's height above the horizon from the scale on the back. By night the same was done with a star whose pointer was on the star map.
Next came the Sun's place in the zodiac, found for the date from tables or, on many instruments, from a calendar scale on the back. The astrologer turned the star map until the Sun's degree on the zodiac ring lay on the circle of the measured height: on the eastern side of the plate before noon, on the western side after. With the map set this way, the plate shows the whole sky as it stood at that moment.
The time could then be read in two ways. Laying the rule across the Sun's degree and reading the limb gives the hours before or after noon, fifteen degrees of the limb to an hour. Many plates also carry the twelve unequal hours of the day, drawn below the horizon, which the astrologer read by day from the point opposite the Sun's degree: the same seasonal hours by which the planetary hours are counted.
How astrologers found the Ascendant with an astrolabe
Once the star map is set, the Ascendant needs no further work. The degree of the zodiac ring that crosses the eastern horizon line is the rising degree, al-ṭāliʿ; the degree on the meridian above the center is the Midheaven; the degree on the western horizon is the Descendant; and the degree on the meridian below is the lowest point, the fourth. Those four points are the angles of a chart, and from them the astrologer counted the houses and judged what was strongest.
When the hour was already known, from a water clock or a sundial, the work ran the other way: the astrologer turned the map until the time stood at the limb, then read the rising degree. The reading is only as fine as the engraving, so where more care was wanted, as in a nativity, astrologers worked the degree out again from tables of ascensions computed for their latitude.
A worked example: one morning in Baghdad
Here is the reading worked through for one morning. The place is Baghdad, at about 33°20′ north; the day is the spring equinox, so the Sun stands at the first degree of Aries and rises at six by the Sun's own time. For each height of the Sun, the table gives what a correctly set astrolabe shows.
| Sun's height | Time after sunrise | Rising degree | Midheaven |
|---|---|---|---|
| 10° | 48 minutes | Aries 18° | Capricorn 11° |
| 20° | 1 hour 37 minutes | Taurus 5° | Capricorn 22° |
| 30° | 2 hours 27 minutes | Taurus 21° | Aquarius 4° |
| 40° | 3 hours 21 minutes | Gemini 7° | Aquarius 17° |
| 50° | 4 hours 26 minutes | Gemini 23° | Pisces 4° |
In under four and a half hours the rising degree runs from the start of Aries to late Gemini, almost three whole signs. That is why a chart cast for a guessed time can name the wrong rising sign, and why astrologers asked for the hour of birth before anything else.
The figures were calculated for this page from the geometry of the sky, with the Sun's height taken as the true height, before the small lift the air gives near the horizon. They were then checked against a real equinox morning at Baghdad, in 2028, when the Sun crosses into Aries a little before it rises there: the rising degree agrees in every row. The day of the equinox itself moves a little each year; the equinoxes and solstices page gives the dates.
Where the astrolabe came from
The geometry behind the astrolabe is Greek. To draw the round sky on a flat plate, the maker uses a projection that turns every circle of the sky into a circle, or a straight line, on the plate, and Ptolemy, in the second century, wrote a short work on it, the Planisphaerium. The name is Greek, astrolabos, the star-taker, which Arabic took over as asṭurlāb.
The oldest description of how to use the instrument that survives is a Greek treatise by John Philoponus of Alexandria, in the sixth century. In the seventh century Severus Sebokht, a Syrian bishop and scholar, wrote another in Syriac. Both came before the Abbasid caliphs founded Baghdad, and both were part of the learning the city's translators inherited.
The astrolabe in the Arabic-speaking world
In Arabic the instrument was made more exactly, described at greater length and given new forms. The table lists the makers and authors whose place and date the evidence supports; where the evidence is only a later report, it says so.
| Name | Where | When | What is known |
|---|---|---|---|
| al-Fazārī | The Abbasid court | 8th century | Later writers credit him with the first astrolabe made in the Islamic world; he wrote on its use. He was among the astrologers who chose the moment for the founding of Baghdad. |
| Nasṭūlus (Muḥammad ibn ʿAbd Allāh) | Baghdad | 315 AH (927–928 CE) | Signed the oldest astrolabe that carries a date and survives today, an instrument now in the al-Sabah Collection in Kuwait. |
| al-ʿIjliyya | Aleppo | 10th century | An astrolabe maker at the court of Sayf al-Dawla, named by Ibn al-Nadīm in his catalog of books and authors, the Fihrist. |
| al-Ṣūfī | The court of ʿAḍud al-Dawla | 10th century | The author of the Book of the Fixed Stars also wrote a long treatise on how to use the astrolabe, copied in several versions of different lengths. |
| al-Bīrūnī | Ghazna | 1029 | His Book of Instruction, al-Tafhīm, explains the astrolabe as part of the grounding an astrologer needs. |
| al-Zarqālī | Toledo | 11th century | Designed a universal plate, al-ṣafīḥa al-zarqāliyya, Latin saphea, that works at any latitude without changing plates. |
| Ibn al-Sarrāj | Aleppo | 729 AH (1328–1329 CE) | Made a universal astrolabe that works for every latitude, now in the Benaki Museum in Athens. |
The instrument served more than astrology. Mosque timekeepers used it to fix the hours of prayer, and many plates carry extra lines for them. Surveyors used a scale on the back to measure the heights of buildings and the distances to them.
From al-Andalus the instrument and its vocabulary passed into Latin. The European words alidade and almucantar come from Arabic, and the star names on a European rete, Aldebaran, Altair, Vega, are mostly Arabic names too; the fixed stars page gives the Arabic name of each star the tradition used.
The astrolabe and the chart today
What the astrolabe did with brass and a sighting rule, setting the sky to a moment and reading the degree in the east, is the same arithmetic a chart program does now from a birth time and place. The questions the old astrologers asked of that degree have not changed: which sign rises, which planet rules it, and what stands in the houses counted from it. The rising sign and houses pages take up those questions.
Questions
What is an astrolabe used for?
An astrolabe tells the time by day or night from the measured height of the Sun or a star, and shows the sky as it stands at that moment. Astrologers used it to find the degree rising in the east, the Ascendant. It also served mosque timekeepers fixing the hours of prayer and surveyors measuring heights and distances.
Who invented the astrolabe?
No single inventor is known. The projection that puts the sky on a flat plate was described by Ptolemy in the second century, and the oldest surviving treatise on using the instrument is by John Philoponus of Alexandria in the sixth. Makers in Baghdad, Aleppo and Toledo then refined it, adding universal plates that work at any latitude.
How old is the oldest astrolabe?
The oldest astrolabe that carries a date and still survives was made in Baghdad by Nasṭūlus in the year 315 of the Hijra, 927 or 928 CE. It is now in the al-Sabah Collection in Kuwait.
How did astrologers find the Ascendant with an astrolabe?
They measured the height of the Sun or a star with the sighting rule on the back, then turned the star map on the front until that body sat on the circle of the same height. The degree of the zodiac ring lying on the eastern horizon line was the rising degree, and the degree on the meridian was the Midheaven.
What does the word astrolabe mean?
It comes from the Greek astrolabos, the star-taker, because the instrument takes the height of a star. Arabic borrowed it as asṭurlāb, and medieval Latin as astrolabium. Several of its parts kept Arabic names in Europe, among them the alidade, the sighting rule, and the almucantars, the circles of equal height.